Jennifer Hartman TV Stand November 25th, 2018 - 23:49:50
The oak TV stand already cut to length and width. We've got some drawer fronts that are going to be re sword on the band saw. The legs are 60 ml by 60 ml. By about 600 long, I've got one board to make most of the rails out of I've got my domino stop, and I also have a video on making your loose tenon stock and a whole bunch of off cuts here from previous projects. For month. I started by cross-cutting the long board to a rough length for the long and short apron rails. If it then will comfortably rip the long rails to width as you'll see.
This is a pretty repetitive project with Watson very similar parts. After the rails will cross cut to length. I can use the number to quickly do the joinery this whole fast, F club combo thing is really useful for batching out Domino joinery after attending by mistakes. A few times I'd like to clearly mark the top of my legs in the orientation they'll go when assembled. This makes it much easier to layout the joinery again. The Domino is used because the size of the potato unit will have per those grooves are cutting the router table in the short aprons, the grooves in the legs.
The router is used out of the tackle and very seriously considering getting a new router as the edge guide on the trodden is absolute garbage, Edmund becoming a little bit more frustrating with the brand. You first thing assembly's work, but nothing else if I was to glue all the Rosen and face room together or at the same time it would be almost impossible to get it all clamped up before the glue set. It would be a real nightmare. In the end, I think I had three or four major glow up sessions simplest, we'll pull it up and start wherever than surgery for the face room which again was dominoes.
This created a nice stack of modest two rails for the central vertical base for members. I had to set the domino to the shallowest setting Domino on both sides I mentioned at the side I make my own loose tenon stocks like to cut that to link that. Another mistake where I for the mortise on my leg, as I forgot entirely badly for the base room.