Karla Mckay TV Stand September 11th, 2018 - 23:52:22
This one in particular, just has a glass casing on the bottom, the stand basically the base, and then the TV mounts basically right now I have everything laid out so to make sure I have all parts available to me the tool, your remember, your part that you'd be using our Phillips, screwdriver and a socket and ratchet this size is a half-inch, so you have that size of a socket. Then I recommend using that on the tools are also included as well.
If you don't have the tools, I'm gonna be eating my tools. Just for the convenience other than that, let's get started so pretty much. What you're going to start off with is you're your base, which is the bottom here. I went ahead and inserted the spacers on the bottom already and a package you received to have. Basically, your hardware pack there's no B heck for rubber pieces. They kind of lay that square we're going to do is place them on the corners, so it stays level then we're gonna do next is get this piece right here.
So basically, it separates the glass from the base here and then also you're going to grab this piece right here. So what you're going to do is place this piece on the bottom like that and you're going to get screws. I um they're, the only third. You can't really get a few since they're, like the longest screws in your hardware pack, so you're going to get those place them through the holes right here.